Acura 2010 TL Owner's Manual page 550

Table of Contents

Advertisement

If you have a flat tire while driving,
pull over safely. Drive slowly along
the shoulder until you get to an area
far away from traffic lanes.
The vehicle can easily roll off
the jack, seriously injuring
anyone underneath.
Follow the directions for
changing a tire exactly, and
never get under the vehicle
when it is supported only by the
jack.
1.
Park the vehicle on firm, level, and
non-slippery ground. Put the
transmission in Park (automatic)
or reverse (manual). Apply the
parking brake.
2.
Turn on the hazard warning lights,
and turn the ignition switch to
the LOCK (0) position. Have all
passengers get out of the vehicle
while you change the tire.
:
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. VEHICLE
OFF (LOCK) Mode is the
equivalent of LOCK (0). For
more information, see pages
178
and
181
.
2010 TL
Changing a Flat Tire
3.
Open the trunk. Pull up the handle
on the trunk floor lid. Raise the lid
by lifting it up with the handle,
then hook the handle to the trunk
opening to keep the lid open.
HANDLE
CONTINUED
547

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents