Acura 2010 TL Owner's Manual page 165

Mirrors
Adjusting the Power Mirrors
SELECTOR SWITCH
ADJUSTMENT SWITCH
1. With the ignition switch in the
ON (II) position, move the
selector switch to the L (driver's
side), or R (passenger's side).
2. Push the appropriate edge of the
adjustment switch to move the
mirror right, left, up, or down.
162
3. When you finish, move the
selector switch to the center (off)
position. This turns the
adjustment switch off to keep your
settings.
: Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
178 and 181 .
2010 TL
Reverse Tilt Door Mirror
Both outside door mirrors have a
reverse tilt feature. When in
reverse, the selected mirror will
tilt down slightly to improve your
view as you parallel park. Shifting
out of reverse will return the
mirror to its original position.
To tilt the driver's mirror, place
the selector switch in the left
position.
To tilt the passenger's mirror,
place the switch in the right
position.
To turn the feature off, place the
switch in the center position.
Outside mirror positions can be
stored in the driving position
memory system (see page 164 ).