Acura 2010 TL Owner's Manual page 68

Table of Contents

Advertisement

Charging System
Indicator
If this indicator comes on when the
engine is running, the battery is not
being charged, and you will also see
a ''CHECK CHARGING SYSTEM''
message on the multi-information
display. For more information, see
page
595
.
Immobilizer System
Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. It will then go off if
you have inserted a properly coded
ignition key, on models with keyless
access system, if an appropriate
keyless access remote is used. If it is
not a properly coded key or keyless
access remote, the indicator will
blink, and the engine's fuel system
will be disabled (see page
:
Models equipped with the
keyless access system have an
engine start/stop button instead
of an ignition switch. ON Mode
is the equivalent of ON (II). For
more information, see pages
178
and
143
).
181
.
2010 TL
Instrument Panel Indicators
U.S.
Canada
Parking Brake and
Brake System
Indicator
This indicator has two functions:
1.
It comes on when you turn the
ignition switch to the ON (II)
position. It is a reminder to check
the parking brake. Driving with
the parking brake not fully
released can damage the brakes
and tires.
If you drive without releasing the
parking brake, a beeper will sound,
and you will also see a ''RELEASE
PARKING BRAKE'' message on
the multi-information display (see
page
204
).
CONTINUED
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents