Acura 2010 TL Owner's Manual page 168

To cancel the storing procedure
after pressing the SET button, do
any of the following:
Fail to press a memory button
within 5 seconds.
Readjust the seat position.
Readjust the outside mirror
position.
On models without keyless access
system
Turn the ignition switch out from
the ON (II) position.
On models with keyless access system
Change the power mode out from
ON.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
2010 TL
Driving Position Memory System
Selecting a Memorized Position
MEMORY BUTTONS
To select a memorized position, do
this:
1. Make sure the parking brake is set
and the shift lever is in Park
(automatic).
2. Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
CONTINUED
165