Chapter 4 Using The Software; Starting And Exiting The Utility Software; Starting/Displaying; Closing The Console Window Without Exiting From Resident Mode (Windows Only) - Sony PDW-U2 Operation Manual

Using the Software
4-1 Starting and
Exiting the Utility
Software

4-1-1 Starting/Displaying

First make sure that this unit is connected to
the computer.
For connection details, see 3-2-1 "Connecting to a
Computer" (page 39).
On a Windows computer
With the computer connected to this unit,
carry out any of the following.
• Double click the Utility icon which
appears in the task tray. Alternatively,
right click the icon to open the menu, and
select "Open Console" from the menu.
• If you created a shortcut icon on the
desktop when you installed this software,
double click the icon.
• Click the [Start] button on the computer
and then select "Sony XDCAM Drive">
"XDCAM Drive Utility".
On a Macintosh computer
Open the folder in which the utility
software is installed, and then double click
on the executable file of the Utility
Software.
Chapter
This displays the home window of the
utility software.
Note
You must log on to the computer as a user
with Computer Administrator privileges to
be able to change the settings in the User
Settings screen of the utility software.
4-1-2 Closing the Console
Window without Exiting
from Resident Mode
(Windows only)
With the computer connected to this unit,
carry out any of the following.
• Click the × (close) button in the top right
corner of the window.
• Right click the title bar and select
"Close" from the context menu.
• With this software activated, press Alt +
F4 (press the F4 key while holding down
the Alt key).
• Select "View"> "Close" from the menu
bar.

4-1-3 Exiting

On a Windows computer
Right click the Utility icon in the task tray
and select "Exit XDCAM Drive Utility
Software".

4-1 Starting and Exiting the Utility Software

4
43