Processor Adjustment Range - Sony HVR-1500A Operating Instructions Manual

When controlling from DSRM-10 Remote Control
Unit:
DV/DVCAM/DVCPRO:
HDV 1080i:
Video performance
Band width (525/59.94)
Composite/S-video:
Component:
Band width (625/50)
Composite/S-video:
Component :
S/N Composite/S-video I/O (Y):
Component I/O (Y):
Y/C delay 30 ns or less
K-factor 2.0% or less (K2T, KPB)

Processor adjustment range

±3 dB/ – ∞ to 3 dB selectable
1)
Video level
±3 dB/ – ∞ to 3 dB selectable
1)
Chroma level
1)
Setup/Black level
±30 IRE (±210 mV)
1)
Chroma phase ±30°
1)
System phase Sync: ±1μs
SC: ±180°
1) Adjust with menu settings.
Audio performance
Frequency response
Two-channel (48 kHz) mode:
20 Hz to 20 kHz ±1.0 dB
Four-channel (32 kHz) mode:
20 Hz to 14.5 kHz ±1.0 dB
Dynamic range More than 87 dB
Distortion (THD + N)
Less than 0.07% (48 kHz)
104
Specifications
Jog mode: 0 (still) to 2 times normal
speed in both directions
Shuttle mode: 0 (still) to 16 times
normal speed in both directions
Jog mode: 0 (still) to 1 times normal
speed
Shuttle mode: 0 (still) to 24 times
normal speed in both directions
30 Hz to 4.2 MHz ±1.0 dB (Y)
30 Hz to 5.0 MHz ±1.0 dB (Y)
30 Hz to 1.5 MHz +1.0/–5.0 dB (R–
Y/B–Y)
25 Hz to 4.8 MHz ±1.0 dB (Y)
25 Hz to 5.0 MHz ±1.0 dB (Y)
25 Hz to 2.0 MHz +1.0/–2.0 dB (R–
Y/B–Y)
52 dB or more
54.5 dB or more
Input connectors
Digital signal inputs
SD/HD SDI IN BNC type (1), Serial digital (270 Mbps),
SMPTE 259M/ITU-R BT.656
HD-SDI format, SMPTE 292M
compliant
AUDIO I/O (AES/EBU) IN
BNC type (2), AES-3id-1995 Compliant
HDV/DV 6-pin IEEE 1394 connector, S100 (1)
Analog video inputs
REF. VIDEO IN
BNC type (2, loop-through with 75 Ω
automatic terminator)
Black burst or Composite sync
0.286 Vp-p (525/60) or 0.3Vp-p (625/
50), 75 Ω , negative sync or HD bipolar
tri-level sync
0.6Vp-p, 75 Ω , negative sync
VIDEO IN (optional HVBK-1505 Analog Input Board
required)
BNC type (4, loop-through with 75 Ω
automatic terminator), composite/
component (SD)/S-video switchable
Composite Y/S-Y/CPST and 1 loop-through with
75 Ω automatic terminator: 1.0 Vp-p,
75 Ω , negative sync
Component (SD)
Y/S-Y/CPST: 1.0 Vp-p, 75 Ω , negative
sync
R–Y/S-C and B–Y: 0.7 Vp-p (75% color
bars for 525/59.94 or 100% color bars
for 625/50), 75 Ω
Y/S-Y/CPST: 1.0 Vp-p, 75 Ω , negative
S-video
sync
R–Y/S-C: 0.286 Vp-p (525/59.94) or
0.3 Vp-p (625/50), 75 Ω (burst level)
Analog audio inputs
AUDIO IN (optional HVBK-1505 Analog Input Board
required)
XLR 3-pin, female (2), +4/0/–3
–6 dBm, high impedance, balanced
1) For 625/50 only
Timecode input
TC IN BNC type (1), SMPTE timecode (525/
59.94) or EBU timecode (625/50), 0.5
Vp-p to 18 Vp-p, 3.3 k Ω , unbalanced
Output connectors
Digital signal outputs
SDI OUT BNC type (2)
Serial digital (270 Mbps), SMPTE 259M/
ITU-R BT.656
HD SDI OUT BNC type (2)
1)
/