Overview; Basic System Configuration - Sony F23 Operation Manual

Overview

The CA-F101 Optical Fiber Camera Adapter is designed to
be directly mounted on a Sony F23 or F35 Digital
Cinematography Camera, achieving signal transmission
and interface between the camera and the SRW-1 HD
Portable Digital Recorder/SRPC-1 HD Video Processor
via a hybrid optical camera cable.
Video of RGB4:4:4 up to 1080/30P or Y Cb Cr 4:2:2 up to
1080/60P can be transmitted along with 2-channel audio
and control signals via a single hybrid optical camera cable
(1 km long at maximum).
In a system where the camera and recorder are to be
operated in the undocked condition, the number of cables
between the camera and recorder can be decreased, for
smooth system operations.

Basic System Configuration

This unit is designed assuming usage in the following system.
Viewfinder
HDVF-C950W
HDVF-C35W
FILTER
1 CLEAR
2 1/4 ND
ND 3 1/16ND
4 1/64ND
5 CAP
A 5600K
B 3200K
CC C 4300K
D 6300K
E 1/2 ND
ff T
1.6
2
2.8
60
4
30
5.6
20
8
15
11
12
16
10
8
CL RUN
7
6
5.6 AUTO
5
4.6
F23/F35 Digital
Cinematography
Camera
Note
Power supply via the hybrid optical camera cable is not included in this system. Supply power independently to the camera
and the recorder.
18
Overview
Interface box
(supplied with F23/F35)
BKP-L551 Battery Adaptor
+ BP-GL95 Battery Pack
CA-F101
1 2 3
LOCK VF MENU/DISPLAY CANCEL/STATUS
4
BLK
BAL
PAGE SET
PRO
Hybrid optical camera cable
DC 12 V power
4 : 2 : 2
HD monitor
Various camera controls, including the Select FPS
function, are also enabled by connecting a camera remote
control unit to the recorder as the base station.
Note
When using the CA-F101, confirm that the devices to be
used in combination match the following requirements:
• The HKSR-101 Optical Interface Unit has been mounted
on the SRPC-1 HD Video Processor.
• The F23/F35 Digital Cinematography Camera is Ver. 1.3
or later.
• The SRW-1 and SRPC-1 are Ver. 2.6 or later.
• When using the Select FPS function, the HKSR-102
Picture Cache Board has been installed in the SRW-1.
a) Cable that conforms to ARIB (BTA S-1005B), ANSI/SMPTE (304M-1998/
311M-1998), or EBU (R100-1999)
b)The RM-B750 can also be connected to the RM connector of the camera.
Note however that simultaneous connection to both the camera and recorder
is not allowed. Camera menu operations from the LCD of the RM-B750 is
enabled only when the RM-B750 is connected to the camera.
a)
4 : 2 : 2
HD monitor
SRW-1
HD Portable
Digital Recorder
SRPC-1
HD Video
Processor
+ HKSR-101
Optical Interface
Unit
DC 12 V power
RM-B750
b)
Remote Control Unit