Asus P9D-I Manual page 97

The ARRAY SELECTION MENU displays the available drives connected to the SATA
2.
ports. Use the up/down arrow keys to select the drives you want to include in the RAID
set then press <Space>. When selected, the drive indicator changes from READY to
ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
LSI Software RAID Configuration Utility Ver C.05 Oct 26,2011
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
• The information of the selected hard disk drive displays at the bottom of the screen.
• You need at least two identical hard disk drives when creating a RAID 1 set.
• You need at least four identical hard disk drives when creating a RAID 10 set.
3. Select all the drives required for the RAID set then press <F10> to configure the array
setting.
4. Press <Space> to select the configurable array.
LSI Software RAID Configuration Utility Ver C.05 Oct 26,2011
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-Chidinfo F3-SlotInfo F10-Configure Esc-Quit
ASUS P9D-I
BIOS Version A.11.02090932R
Easy Configuration - ARRAY SELECTION MENU
PORT #
0 ONLIN A00-00
1 ONLIN A00-01
2 READY
3 READY
74.74GB HDS728080PLA380
BIOS Version A.11.02090932R
Easy Configuration - ARRAY SELECTION MENU
Select Configurable Array(s)
PORT #
A-0
0 ONLIN A00-00
SPAN-1
1 ONLIN A00-01
2 READY
3 READY
05.01C05
5-7