Using Privacy Masking - Masking A Camera Image - Sony Ipela SNC-EP520 User Manual

Log tab
Overwrite the oldest log file
To set the size of the log file, check Enable and specify
the minimum required space for a log file.
Log output folder
Click Browse to display the folder selection dialog.
Specify the folder to save the log.
Using Privacy Masking —
Masking a Camera Image
The Privacy Masking function of SNC toolbox allows
you to mask parts of the camera image to be transmitted.
1
Select the camera to set a privacy mask from the
Device list.
2
Click Masking.
Using the Privacy Masking
The Privacy Masking screen enables you to set the
privacy mask position.
Click Masking to display the Privacy Masking screen.
100
Using the SNC toolbox
Privacy Masking screen
Viewer
Panorama image area
Viewer
A live image of the camera is displayed. You can specify
the position of the privacy mask in this area.
If you click on the image, the camera moves so that the
clicked point goes to the center of the image.
Panorama image area
The panorama image created with the supplied
Panorama Creator is displayed.
The positions of the registered privacy masks are shown
with numbers in this area.
If you click on the panorama image, the camera moves
to the clicked point.
Note
The default image is shown when no panorama image
has been created.
PTZ Controller
Allows you to pan, tilt and zoom the camera.
Pan/tilt control
Click the arrow button of the direction in which you
want to move the camera. Keep it pressed to move the
camera continuously.