Panning And Tilting By Clicking The Monitor Image (Area Zoom Mode Only); Panning, Tilting And Zooming By Specifying The Area (Area Zoom Mode Only); Panning And Tilting By Dragging The Screen (Vector Dragging Mode Only) - Sony Ipela SNC-EP520 User Manual

• When you select On in "Horizontal tilt limit"
(page 38), the camera will not move beyond
horizontal level.
Zoom control
Click to zoom out, and click
Zooming continues while the button remains pressed.
Indicates the
available area of
analog zoom.
Note
The four edges of the image may be dark depending on
the zoom position. This is a phenomenon related to the
structure of the camera, and does not cause a problem.
Focus control
To focus on a nearby object, click
distant object, click .
By clicking
optimum position.
Note
To control the focus manually, set Focus mode of the
Camera menu to Manual (page 43).
Panning and tilting by clicking the
monitor image (Area zoom mode
only)
Click on the monitor image, and the camera moves so
that the clicked portion is positioned at the center of the
display.
to zoom in.
Indicates the
available area of
digital zoom.
. To focus on a
, the focus is set to the
Panning, tilting and zooming by
specifying the area (Area zoom
mode only)
Click and hold the left button of the mouse on the
monitor image, and drag the mouse diagonally to draw a
red frame around the portion you want to enlarge. The
camera moves so that framed portion is positioned at the
center of the display and is zoomed in.
Notes
• When Zoom mode in the Camera menu is set to Full,
zooming of the specified area stops at the T end of the
optical zoom. If you want to zoom in further using the
digital zoom, specify the area again.
• When the specified area is zoomed in, the center may
be shifted or some portion of the image may appear
out of the monitor image section. In this case, click the
point you want to move to the center or click the arrow
button on the camera control panel.
Panning and tilting by dragging the
screen (Vector dragging mode
only)
When you click on the starting point on the image and
drag to the end point, the camera pans/tilts in the
direction of the arrow from the starting point to the end
point. The speed of operation is determined by the
length of arrow. Releasing the button on the mouse stops
the panning/tilting of the camera.
27
Operating the Camera