Sony Ipela SNC-EP520 User Manual page 10

Installing ActiveX Control
During installation of ActiveX Control, the
"Information Bar" or "Security Warning" may appear.
In this case, operate as follows:
If the message "Information Bar" appears, click OK.
If the information bar appears, click on the bar and select
Install ActiveX Control....
If " Internet Explorer – Security Warning" appears, click
Install.
Program name
The installation of ActiveX Control starts. When
installation is completed, the main viewer or the Motion
detection menu appears.
Configuring Windows Firewall
SNC toolbox or SNC audio upload tool may not operate
correctly depending on the configuration of Windows
Firewall. (No cameras are shown in the list even if they
are detected.) In this case, confirm the Windows
Firewall configuration as follows:
Example: In case of SNC toolbox
1
Select Control Panel from the Start menu of
Windows.
2
Select Security Center of the working field.
10
Assigning the IP Address to the Camera
3
Select Off in the Windows Firewall dialog.
The camera will be displayed in the list.
If you want to keep Windows Firewall On, continue
with the following steps.
4
Select the Exceptions tab.
5
Click Add Program....
6
In the Add Program dialog, select SNC toolbox and
click OK.
SNC toolbox is added to the Programs and Services
list.