Fujitsu fi-4120C2 Operator's Manual page 80

•
For Windows 95 / Windows NT 4.0
1) When turning on the power, check that the scanner is connected to your PC.
2) Right click the "FUJITSU Scanner Control Center" icon displayed in the task tray,
3) Click the "Device Set" tab.
4) After clicking the [Clear] button beside "Pick Roller" in "Page Counter", click the
64
then select "Option".
⇒ The following screen is displayed.
[OK] button.
⇒ The following message is displayed.
Click the [OK] button.
The Pick counter (The Pick roller counts) returns to "0".