Playing Back More Than 16 Channels - Yamaha DGT7A Advanced Operation Manual

Channel Description
OFF No data is sent to the MIDI
instrument.
1 to 16 The Disklavier keyboard data and
pedal data is sent on the selected
channel.
HP Keyboard data and on/off pedal
data will be sent on channel 1,
and continuous pedal data (half
pedal) will be sent on channel 3.
In this case the pedal data will be
continuously variable (half pedal).
If you want to play the piano parts on the
internal XG tone generator, set Piano Rcv
Ch to ##. There will be no delay effect if all
channels are monitored on the internal XG
tone generator.
See "Controlling the Disklavier in Real
Time" on page 59 for details on the 500 ms
delay effect.
To monitor all recording parts on the
internal XG tone generator, set the "Echo
Back" or "Patch Thru" options on the
computer or sequencer to ON. See their
operating manuals for details.
5
Press [FUNC.] or [STOP] to return
to the normal display.
74
Playing Back More than
16 Channels
You can play back from a computer song data that
contains up to 32 channels by connecting the
Disklavier's TO HOST connector to the serial port
on a computer and its MIDI OUT connector to a
MIDI instrument. The 32 channels are sent to the
Disklavier using software corresponding to port
signals. The Disklavier plays channels 1 to 16
(port 1), and channels 17 to 32 (port 2) are output
to an external MIDI instrument.
1
Press [FUNC.].
2
Press [>] until the c cursor is next
to the MIDI Setup option, then
press [ENTER].
The following display appears.
3
Press [>] until the c cursor is next
to the MIDI Out option, then
press [ENTER].
The following display appears.
See "Summary of the MIDI Out Parameter
in a Computer Setup" on pages 76 and 77
for details on the MIDI Out parameter.
4
With the c cursor next to the MIDI
Out parameter, use the [–/NO]
and [+/YES] buttons to select
"Thru Port2".
5
Press [FUNC.] or [STOP] to return
to the normal display.