Deleting A Track - Yamaha DGT7A Advanced Operation Manual

6
Press [>] to position the c cursor
next to the arrow, then use the
[–/NO] and [+/YES] buttons to
select the destination track.
The above example shows that track 05 is
to be copied to track 06.
Note: Any data that already exists on the
destination track will be overwritten.
7
Press [ENTER].
A display similar to the following appears.
8
Press [+/YES] to copy the track.
The selected track is copied to the
destination track.
If you do not want to copy the track, press
[–/NO] to cancel the function.
Note: If a piano track is copied to an
Ensemble track or vice versa, the piano
track's continuous pedal data (half
pedal) will be lost, but the on/off pedal
data will be kept.
46

Deleting a Track

1
Specify a disk.
2
Press [FUNC.].
The FUNC. indicator lights and the
Function menu appears.
3
Press [>] until the c cursor is next
to Track, then press [ENTER].
The following display appears.
4
With the c cursor at the far left,
press the [–/NO] and [+/YES]
buttons until "Del" appears.
5
Press [>] to move the c cursor to
its next position, then use the
[–/NO] and [+/YES] buttons to
select the track you want to
delete.
The symbol of the selected track is blacked
in.
The above example shows that track 05 is
to be deleted.