3
Enter a destination fax number using the keypad on the control
panel.
4
Select [Done], then press <OK>.
• You can also use the keypad to enter a destination on the screen
that appears after pressing the <FAX> key. In this case, the fax
standby screen appears after entering a destination.
Dialing Functions
You can use the following functions when entering a destination fax
number. Select the function you want, then press [OK] on the fax
number entry screen.
• - (Hyphen)
Inserts a hyphen to the entered fax number.
• Pause
Pauses two seconds when dialing. You can use multiple pauses.
• Tone
Switches to tone dialing if pulse dialing is set.
• PreFix
Inserts a prefix number registered in advance.
• Flash
Inserts a prefix to the entered fax number to access the external
line when PBX is enabled.
Note
For details on prefix numbers, refer to the Advanced User's
Guide at www.my.okidata.com.
85
–
MC361/MC561 Basic User's Guide
Faxing