Konica Minolta bizhub 25e Printer Manual page 41

„ "Print Quality" tab
Item
Toner Saving
Resolution
Print Density
Advanced Options
True Type Font
*1
Printing
PostScript Pass
*2
Through
Graphic
enhanced mode
*1 This setting is available on PCL 5e and PCL 6 printer drivers, and PostScript 3 printer driver.
*2 This setting is available on PostScript 3 printer driver.
*3 This setting is available on GDI the printer driver.
2-8 Setting the printer
Select "On" to restrict toner consumption.
Select the printing resolution.
Set the print density level (between -50 and 50).
Select the print processing method when using TrueType fonts.
When PostScript Pass Through is enabled, functions such as watermark,
combine, and booklet printing may not be printed correctly in some
application software.
For some applications, this is because PostScript data sent to printer cannot
be controlled by the driver. In this case, disable "PostScript Pass Through".
If you disable "PostScript Pass Through", application software may perform
unexpected operations. It is recommended that you normally enable this
function.
The processing of the image data may become slower or printing may not be
*3
performed correctly, depending on the application.
In such cases, printing may be performed correctly by enabling this setting.
However, it is recommended that you usually use the machine with this
setting disabled because it may cause printing not correctly.
Click [Advanced] and then check the box for "Graphic enhanced mode" to
enable this setting.
Description