Back to Contents Page
PCMCIA Card Cage
Dell Precision™ Mobile Workstation M4500 Service Manual
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the PCMCIA Card Cage
NOTE:
You may need to install Adobe™ Flash Player™ from Adobe.com in order to view the illustrations below.
1. Follow the procedures in
Before Working Inside Your
2. Remove the
battery
3. Remove the
PCMCIA
card.
4. Remove the
access
panel.
5. Remove the
hinge
covers.
6. Remove the
LED
cover.
7. Remove the keyboard.
8. Remove the
hard
drive.
9. Remove the
finger print
reader.
10. Remove the
heat sink and fan
11. Remove the
display
assembly.
12. Remove the
palm rest
assembly.
13. Remove the screws that secure the PCMCIA card cage to the chassis.
14. Press down the PCMCIA card cage and lift it by the edge to release the PCMCIA card cage from the securing tabs.
15. Remove the PCMCIA card cage from the computer.
Replacing the PCMCIA Card Cage
To replace the PCMCIA card cage, perform the above steps in reverse order.
Back to Contents Page
Computer.
assembly.