Removing The Display Panel; Replacing The Display Panel - Dell Precision M4500 Service Manual

Back to Contents Page
Display Panel
Dell Precision™ Mobile Workstation M4500 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Display Panel

NOTE: You may need to install Adobe™ Flash Player™ from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Remove the battery.
3. Remove the access panel.
4. Remove the hinge covers.
5. Remove the display assembly.
6. Remove the display bezel.
7. Remove the screws that secure the display panel to the display assembly.
8. Lift the display panel and gently lay it on a flat clean surface.
9. Disconnect the display cable from the display panel.
10. Remove the display panel from the display assembly.
11. Remove the screws on either sides of the display panel, to release the display brackets.
12. Remove the display brackets from the display panel.

Replacing the Display Panel

To replace the display panel, perform the above steps in reverse order.
Back to Contents Page
Computer.