Table of Contents
Advertisement
Back to Contents Page
Power Button Board
Dell™ Inspiron™ 1018 Service Manual
Removing the Power Button Board
Replacing the Power Button Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Power Button Board
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the keyboard (see
4. Remove the palm rest assembly (see
5. Turn the palm rest assembly over.
6. Note the routing of the power button board cable and remove the cable from the routing guide on the palm rest assembly.
7. Remove the screw that secures the power button board to the palm rest assembly.
8. Lift the power button board off the palm rest assembly.
1
screw
2
power button board
3
power button board cable
Replacing the Power Button Board
1. Follow the instructions in
Before You
2. Place the power button board on the palm rest assembly and replace the screw that secures the power button board to the palm rest assembly.
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm Rest
Begin.
Removing the
Assembly).
Battery) before working inside the
Advertisement
Table of Contents
