Table of Contents
Advertisement
Replacing the AC Adapter Connector
1. Follow the instructions in
Before You
2. Place the AC adapter connector in the computer base.
3. Route the AC adapter connector cable through the routing guide and connect the cable to the connector on the system board.
4. Replace the I/O board (see
5. Replace the support brackets (see
6. Replace the display assembly (see
7. Replace the middle cover (see
8. Replace the Mini-Card (see
9. Replace the memory module (see
10. Replace the palm rest assembly (see
11. Replace the hard-drive assembly (follow the instructions from
12. Replace the keyboard (see
13. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
Replacing the I/O
Board).
Replacing the Support
Brackets).
Replacing the Display
Assembly).
Replacing the Middle
Cover).
Replacing the
Mini-Card).
Replacing the Memory
Module).
Replacing the Palm Rest
Replacing the
Keyboard).
Battery).
Assembly).
step 5
to
step 7
in
Replacing the Hard
Drive).
Advertisement
Table of Contents
