Fujitsu DESKPOWER 6000 User Manual page 55

Event Logging Configurations
This submenu is used to set up event logs.
Move the cursor to this item and press the Enter key to display a submenu as shown below.
PhoenixBIOS Setup Utility
Main Advanced Security
Event Logging Configurations
Event log Capacity:
Event log Validity:
Clear all Event Logs:
Event Logging:
System Boot Event:
ECC Event:
F1 Help Select Item
ESCExit Select Menu
– Event Log Capacity
This item sets whether event logs can be saved.
- Space Available
Event logs can be saved (up to 255 logs).
- Full
No more event logs can be saved. The area is full.
– Event Log Validity
This item displays whether the event log data is valid.
- Valid
Event log data is valid.
- Invalid
Event log data is invalid. Data may be destroyed.
– Clear all Event Logs
This item sets whether all event logs are cleared at reboot.
- No (Initial value)
Event logs are not cleared.
- Yes
Event logs are cleared. Clear all Event Logs' is [No] at reboot.
– Event Logging
This item sets whether events are logged when they are generated.
- Disabled
Event logging is disabled.
- Enabled (Initial value)
Event logging is enabled.
Power Boot Info
Item Specific Help
Space Available [Yes]
Valid All event logs are
cleared at next boot.
[No] The value is reset to
[No] after clearing.
[Enabled]
[Disabled] [No]
[Enabled] Event logs are not
cleared.
-/Space Change Value F9
Select :Sub-Menu F10Save and Exit
Enter
Exit
Setup Defaults
4
45