Table of Contents
Advertisement
Back to Contents Page
I/O Board
Dell™ Inspiron™ N5010/M5010 Service Manual
Removing the I/O Board
Replacing the I/O Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the I/O Board
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Follow the instructions from
4. Remove the middle cover (see
5. Remove the I/O board from the latch on the computer base.
6. Lift the I/O board off the computer base.
1
I/O board
Replacing the I/O Board
1. Follow the instructions in
Before You
2. Align the connectors on the I/O board with the slots on the computer base and press the I/O board until it is seated fully.
3. Replace the middle cover (see
4. Follow the instructions from
5. Replace the battery (see
Replacing the
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Begin.
Battery).
step 3
to
step 13
in
Removing the System
Removing the Middle
Cover).
Begin.
Replacing the Middle
Cover).
step 6
to
step 17
in
Replacing the System
Battery).
Removing the
Board.
Board.
Battery) before working inside the
Hide quick links:
Advertisement
Table of Contents
