Replacing The Palm Rest - Dell i1470-2932CRD - Inspiron 1470 Cherry Service Manual

For the Inspiron 1570, remove six screws on the palm rest.
CAUTION: Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
14. Starting with the right side of the palm rest, carefully pull up to disengage the tabs on the palm rest from the computer base.
Replacing the Palm Rest
1. Align the palm rest on the computer base and gently snap the palm rest into place.
2. Replace the screws on the palm rest.
3. Connect the touch pad cable and the power button cable to the system board.
4. Route the Mini-Card antenna cables and display cable through their routing guides.
5. Thread the Mini-Card antenna cables through the slot in the computer base.
6. Connect the display cable and replace the screw.
7. Replace the keyboard (see
8. Replace the power button cover (see
9. Replace the screws on the bottom of the computer.
10. Replace the WWAN/FCM cover on the Inspiron 1470.
11. Replace the Mini-Card (see
12. Replace the module cover (see
13. Replace the optical drive (see
Replacing the Keyboard).
Replacing the Power Button
Replacing the Mini-Card).
Replacing the Module Cover).
Replacing the Optical Drive).
Cover).