Replacing The System Board - Dell i1470-2932CRD - Inspiron 1470 Cherry Service Manual

12. Remove the hard drive (see
13. Remove the USB/audio board
14. Remove the card reader board (see
15. Disconnect the power cable and the fan cable from the system board.
1 fan cable
3 system board
16. Remove the two screws that secure the system board to the computer base.
17. Lift the system board up at an angle to ease the I/O connectors out from the computer base.
1 I/O connectors (4)
18. Turn the system board over.
19. Remove the processor heat sink (see
Replacing the System Board
1. Replace the processor heat sink (see
2. Turn the system board over.
3. Place the I/O connectors into the computer base at and angle, then align the system board using the alignment posts on the computer base.
4. Replace the two screws that secure the system board to the computer base.
5. Connect the fan cable and the power cable to the system board.
6. Replace the card reader board (see
7. Replace the USB/audio board
8. Replace the hard drive (see
9. Replace the palm rest (see
Removing the Hard Drive).
(Removing the USB/Audio Board).
Removing the Card Reader
2 power cable
2 screws (2)
Removing the Processor Heat
Replacing the Processor Heat
Replacing the Card Reader
(Replacing the USB/Audio Board).
Replacing the Hard Drive).
Replacing the Palm Rest).
Board).
Sink).
Sink).
Board).