Table of Contents
Advertisement
1 display cable connector
3 display cable routing guides
5 Mini-Card antenna cables routing guides
7 Mini-Card antenna cables
11. Hold the display while you remove the three screws that secure the display assembly to the computer base.
12. Lift and remove the display assembly from the computer base.
1
screws (3)
3
alignment posts (2)
Replacing the Display Assembly
1. Using the alignment posts, place the display assembly in position and replace the three screws that secure the display assembly to the computer base.
2. Route the Mini-Card antenna cables and display cable through their routing guides.
3. Route the antenna cables through the slot in the computer base.
4. Replace the screw and connect the display cable.
5. Replace the keyboard (see
2 screw
4 display cable
6 slot in computer base
2
display assembly
Replacing the
Keyboard).
Hide quick links:
Advertisement
Table of Contents
