Table of Contents
Advertisement
Recording
•
First burst speed has no relation with the transfer speed of the card.
•
The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
•
The Burst Mode speed may become slower depending on the following settings.
–
[SENSITIVITY] (P91)/[PICTURE SIZE] (P120)/[QUALITY] (P121)/[FOCUS PRIORITY]
(P131)/Focus Mode
•
The picture size will be fixed to [S] when [SH] is set.
•
Refer to P121 for information about RAW files.
∫ Focusing in Burst Mode
The focus changes depending on the setting for [FOCUS PRIORITY] (P131) in the
[CUSTOM] menu and the Focus Mode setting.
Focus Mode
AFS
¢1
AFC
MF
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
Note
•
We recommend using the remote shutter (DMW-RSL1; optional) when you want to keep the
shutter button pressed fully while taking pictures in Burst Mode. Refer to P172 for information
about the remote shutter.
•
When the burst speed is set to [SH] or [H] (when the Focus Mode is [AFS] or [MF]), the
exposure and White Balance are fixed at the settings used for the first picture for the
subsequent pictures as well. Depending on the brightness of the subject, the second picture
and subsequent pictures may be brighter or darker. When the burst speed is set to [H] (when
the Focus Mode is [AFC]), [M] or [L], they are adjusted each time you take a picture.
•
If you are following a moving subject while taking pictures in a place indoors, outdoors etc.
where there is a large difference between the light and shade (landscape), it may take time until
the exposure is stable. If burst is used at this time, the exposure may not become optimal.
•
Since the shutter speed becomes slower in dark places, the burst speed (pictures/second) may
become slower.
•
When set to [SH] or [H], the Auto Review function is activated regardless of the Auto Review
setting. (Will not hold) You cannot set the Auto Review function in the [SETUP] menu.
When set to [M] or [L], Live View is displayed between burst frames.
•
When the flash is activated, you can take only 1 picture.
•
Maximum of 3 films will be recorded depending on the Multi Film Bracket setting during
the Multi Film Bracket recording (P119).
It will automatically switch to [H] when set to [SH].
•
The Burst Mode is disabled when White Balance Bracket or Aspect Bracket is set.
•
The Burst Mode is disabled during recording of the motion pictures.
•
The following functions cannot be used when the burst speed is set to [SH].
–
[EX. TELE CONV.]/[DIGITAL ZOOM]/[LONG SHTR NR]/[MODE2] of [STABILIZER]/[
[
] or [
] of [QUALITY]
78
VQT3A48
Focus Priority
ON
OFF
ON
OFF
—
Focus
At the first picture
Normal focusing
Predicted focusing
Focus set with Manual Focus
¢2
¢3
],
Advertisement
Table of Contents
