[REC] Mode:
Taking Pictures using the Built-in Flash
A To open the flash
Slide the flash open lever.
B To close the flash
Press the flash until it clicks.
•
Be sure to close the flash when not in use.
•
The flash setting is fixed to [Œ] while the flash is
closed.
Note
•
Be careful not to catch a finger when closing a flash bulb.
Applicable modes:
Set the built-in flash to match the recording.
•
Open the flash.
1
Select [FLASH] in the [REC] Mode menu. (P55)
2
Press 3/4 to select a mode and press [MENU/SET].
•
For information about flash settings that can be selected, refer to
by Recording Mode
Switching to the appropriate flash setting
"
. (P71)
Recording
"
Available flash settings
VQT3A48
69