Table of Contents
Advertisement
Basic
Perform these settings if you need to.
About the Setup Menu
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their
settings before using them.
For details on how to select the [SETUP] menu settings, refer to P55.
U [CLOCK SET]
•
Refer to P31 for details.
[WORLD TIME]
•
Refer to P116 for details.
— [TRAVEL DATE]
•
Refer to P115 for details.
[BEEP]
•
The [E-SHUTTER VOL] only works when set to [SH] for Burst Mode.
u [VOLUME]
•
When you connect the camera to a TV, the volume of the TV speakers does not change.
[MONITOR]/
[VIEWFINDER]
•
Adjust the brightness of the screen with 3/4, contrast and saturation
with 2/1 or the rear dial.
•
When [DISPLAY] is pressed in screen shown right, it will switch to the
colour adjustment screen. Adjust between green and red with 3/4, or
between orange and blue with 2/1 or the rear dial.
Press [MENU/SET] to return to the LCD adjustment screen.
•
It will adjust the LCD monitor when the LCD monitor is in use, and the
viewfinder when the viewfinder is in use.
•
Some subjects may appear differently from actuality on the LCD monitor/viewfinder. However,
this does not affect the recorded pictures.
58
VQT3A48
" [DESTINATION]/– [HOME]
[TRAVEL SETUP]/[LOCATION]
Set the volume for electronic noises and the electronic shutter
noise.
[BEEP VOLUME]:
[s] (Muted)
[t] (Low)
[u] (High)
Adjust the volume of the speaker to any of 7 levels.
Brightness, colour, or red or blue tint of the LCD monitor/
viewfinder is adjusted.
—
[E-SHUTTER VOL]:
[
] (Muted)
[
] (Low)
[
] (High)
Advertisement
Table of Contents
