Table of Contents
Advertisement
Playback/Editing
6
Press [MENU/SET].
•
When selecting [
press [MENU/SET] and proceed to step
7
Press 3 to select [YES] and then press [MENU/SET].
•
Press [‚] to return to the menu screen. (The menu screen is automatically restored when
[MULTI] is selected.)
Note
•
When you print pictures stamped with text, the date will be printed over the stamped text if you
specify printing of the date at the photo shop or on the printer.
•
You can set up to 100 pictures at one time in [MULTI].
•
The picture quality may deteriorate when text stamping is carried out.
•
Depending on the printer being used, some characters may be cut at printing. Check before
printing.
•
Text and dates cannot be stamped on the pictures in the following cases.
–
Motion pictures
–
Pictures recorded without setting the clock and title
–
Pictures that were previously stamped with [TEXT STAMP]
–
Pictures taken with [
–
Pictures recorded with other equipment
Recorded motion picture can be
a part you need with a part you do not need.
divide
It cannot be restored once divided.
1
Select [VIDEO DIVIDE] on the [PLAYBACK] Mode menu. (P55)
2
Press 2/1 to select the motion picture to divide, and then press [MENU/SET].
•
Motion picture is played back.
3
Press 3 at the location to divide.
•
Motion picture is paused.
Motion picture is played back from the same location when 3 is
pressed again.
•
You can finely adjust the location for division by pressing 2/1
while the motion picture is paused.
4
Press 4.
5
Press 2 to select [YES] and then press [MENU/SET].
•
Motion picture may be lost if the card or battery is removed while processing the dividing.
•
Press [‚] to return to the menu screen.
Note
•
Motion pictures cannot be divided at a location close to the start or end of the motion picture.
•
[VIDEO DIVIDE] may not be performed on motion pictures recorded with other equipment.
•
With [MOTION JPEG] motion pictures, the order of pictures will change if divided.
It is recommended to display these motion pictures by using Calendar Playback (P41) or
[MOTION JPEG PLAY] in the [PLAYBACK MODE] (P143).
•
With [AVCHD] motion pictures, the order of pictures will not change.
•
Motion pictures cannot be divided in the following cases.
–
Motion pictures with a short recording time
146
VQT3A48
3
] or [
], press
7
], [
] or [
[VIDEO DIVIDE]
d in two. It is recommended for when you want to
divide
to select [YES] for stamping [AGE], and then
.
]
Advertisement
Table of Contents
