Frigidaire FGHC2355PF Use And Care Manual page 24

CARE & CLEANING
Care and Cleaning Tips
Part Cleaning Agents
Interior
• Soap and water
& Door
• Baking soda and
Liners
water
Door
• Soap and water
Gaskets
Drawers & • Soap and water
Bins
Glass • Soap and water
Shelves
• Glass cleaner
• Mild liquid sprays
Toe Grille • Soap and water
• Mild liquid sprays
• Vacuum
Exterior &
• Soap and water
Handles
• Non abrasive
glass cleaner
Exterior &
• Soap and water
Handles
• Stainless steel
(Stainless
cleaners
Steel
Models
Only)
Replacing
• Unplug
Light Bulbs
• Wear gloves
• Remove light
• Replace old bulb
• Replace light
• Plug in the
24
Tips and Precautions
refrigerator
cover
cover
refrigerator
• Use two tablespoons of baking soda in one quart
of warm water.
• Be sure to wring excess water out of sponge or
cloth before cleaning around controls, light bulb or
any electrical part.
• Wipe gaskets with a clean soft cloth.
• Use a soft cloth to clean drawer runners and
tracks.
• Do not wash any removable items (bins, drawers,
etc.) in dishwasher.
• Allow glass to warm to room temperature before
immersing in warm water.
• Remove toe grille (see Installation Instructions).
• Vacuum both sides and wipe with sudsy cloth or
sponge. Rinse and dry.
• Do not use commercial household cleaners
containing ammonia, bleach or alcohol to clean
handles.
• Use a soft cloth to clean smooth handles.
• Do not use a dry cloth to clean smooth doors.
• Never use CHLORIDE or cleaners with bleach to
clean stainless steel.
• Clean stainless steel front and handles with non-
abrasive soapy water and a dishcloth. Rinse with
clean water and a soft cloth.
• Use a non-abrasive stainless steel cleaner.
These cleaners can be purchased at most home
improvement or major department stores. Always
follow manufacturer's instruction. Do not use
household cleaners containing ammonia or bleach.
NOTE: Always clean, wipe and dry with grain to
prevent scratching.
• Wash the rest of the cabinet with warm water and
mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
CAUTION: Wear gloves when replacing light
bulbs to avoid getting cut.
Use same wattage when replacing bulb.