Saving A User Song To Usb Flash Memory - Yamaha Portable Grand DGX-650 Owner's Manual

USB Flash Memory Operations

Saving a User Song to USB Flash Memory

This operation saves a User Song (Song numbers
101–105) to USB flash memory.
1
Press the [FILE CONTROL] button to call
up the FILE CONTROL display.
2
Use the CATEGORY [r] or [f] buttons
to call up "User Song Save."
The SOURCE FILE—a User Song name—will be
highlighted.
The source User
Song name.
3
Use the dial to select the User Song you
want to save.
4
Press the [EXECUTE] button.
The DESTINATION FILE parameter will be high-
lighted, and a default name will automatically be
created.
To Overwrite an Existing File
If you want to overwrite a file that already exists on
the USB flash memory, use the dial to select the
file, then skip ahead to step 7.
74
DGX-650 Owner's Manual
5
Press the [EXECUTE] button.
A cursor will appear below the first character in
the file name.
Cursor
6
Change the file name as necessary.
Refer to "Saving a Registration Memory to USB
Flash Memory" on page 73 for filename entry.
7
Press the [EXECUTE] button.
A confirmation message will appear. To cancel the
operation, press the [-] (NO) button.
8
Press the [EXECUTE] button again, or
the [+] (YES) button to execute the Save
operation.
After a while, a message indicating completion of
the operation appears.
The User Song will be saved in a folder labeled
"USER FILES" which will automatically be cre-
ated on the USB flash memory.
NOTICE
• If an existing file name is specified, the display
prompts you for confirmation. Press [EXECUTE] or [+]
if it is OK to overwrite the file, or [-] to cancel.
NOTICE
• The Save operation cannot be cancelled during execu-
tion. Never turn off the power or disconnect the USB
flash memory during the operation. Doing so may
result in data loss.
9
Press the [EXIT] button to exit from the
FILE CONTROL display.
NOTE
• The amount of time it will take to perform the Save opera-
tion will depend on the condition of the USB flash mem-
ory.
The name of the
file to be saved