Yamaha Portable Grand DGX-650 Owner's Manual page 11

2
w
Metal bracket
(C)
L
3
"L"
r
6 x 70 mm
roundhead screws
w
Metal bracket
(A)
e
3 x 8 mm
roundhead
screws
q
Joint
connectors
"R"
w w
Metal bracket Metal bracket
(B) (C)
R
2
Attach the metal brackets.
Attach the metal brackets
boards, using the screws
3
Attach the stand bases.
Insert the joint connectors
as shown. The joint connectors have been installed
properly if you can see the screw head on the con-
nector.
NOTE
• If you put the connectors in wrong direction and want to
take them out, tap around the holes on the boards.
Attach the "L" (Left) and "R" (Right) stand bases
to the bottom of the side boards, using the screws
r . "L" (Left) and "R" (Right) are marked on the
upper surfaces of the stand bases. If you have trou-
ble fastening the screws, use a screwdriver to
rotate the joint connectors so that the connector
holes are aligned with the screw holes on the stand
bases.
Keyboard Stand Assembly
e
3 x 8 mm
roundhead
screws
w
to the top of the side
e as shown.
q into the side boards
DGX-650 Owner's Manual
11