Setting Up; Power Requirements; Connecting A Footswitch (Sustain Jack) - Yamaha Portable Grand DGX-650 Owner's Manual

Setting Up

Power Requirements

WARNING
• Use the specified adaptor (page 81) only. Using the wrong
adaptor can result in damage to the instrument or over-
heating.
1
Connect the AC power adaptor to the DC
IN jack.
2
Plug the AC power adaptor into an AC
outlet.
CAUTION
• Unplug the AC Power Adaptor when not using the instru-
ment, or during electrical storms, to avoid the possibility of
physical injury to you or others, or damage to the instru-
ment or other property.
CAUTION
• Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turn-
ing any components on or off, make sure to set all volume levels to minimum (0). Otherwise, damage to the components, electri-
cal shock, or even permanent hearing loss may occur.

Connecting a Footswitch (SUSTAIN Jack)

The sustain function lets you produce a natural sustain
as you play by pressing a footswitch. Plug the sup-
plied footswitch into this jack and use it to switch sus-
tain on and off.
Damper Resonance
This function simulates the sustain sound produced
with the damper pedal on a grand piano. If you want
to use this function, select Voice 001 (page 23), then
press the Footswitch. This function can be turned off
via the FUNCTION display (page 68).
16
DGX-650 Owner's Manual
1
AC power
adaptor
NOTE
• The sustain function does not affect the Split Voice (page 24).
• Make sure that the footswitch plug is properly connected to
the SUSTAIN jack before turning on the power.
• Do not press the footswitch while turning the power on. Doing
this changes the recognized polarity of the footswitch, result-
ing in reversed footswitch operation.
2
AC outlet