ASROCK X58 Extreme6 Manual page 32

Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB8_9)
(see p.2 No. 25)
USB 3.0 Header
(19-pin USB3_1_2)
(see p.2 No. 23)
Infrared Module Header
(5-pin IR1)
(see p.2 No. 29)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.2 No. 32)
3 2 3 2 3 2
3 2 3 2
connect to the
power supply
CD1
ASRock X58 Extreme6 Motherboard
Either end of the SATA data cable
can be connected to the SATA /
SATAII / SATA3 hard disk or the
SATAII / SATA3 connector on this
motherboard.
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
Besides four default USB 2.0
ports on the I/O panel, there is
one USB 2.0 header on this
motherboard. This USB 2.0
header can support two USB
2.0 ports.
Besides four default USB 3.0
ports on the I/O panel, there is
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB
3.0 ports.
This header supports an optional
wireless transmitting and
receiving infrared module.
This connector allows you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.