Optical Drive; Removing The Optical Drive - Alienware M18x Service Manual

Back to Contents Page
Optical Drive
Alienware M18x Service Manual
Removing the Optical Drive
Replacing the Optical Drive
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Optical Drive
1. Follow the instructions in Before You
2. Remove the battery pack (see
3. Remove the base cover (see
4. Remove the center control cover (see
5. Remove the keyboard (see
6. Remove the macro keyboard (see
7. Remove the power-button board (see
8. Remove the display assembly (see
9. Follow the instructions from
10. Remove the I/O board (see
11. Lift the connector latch on the connector on the system board and disconnect the optical-drive cable from the connector on the system board, and then
gently peel off the optical-drive cable from the computer base.
12. Remove the three screws that secure the optical-drive assembly to the computer base.
1 optical-drive
3 optical-drive cable connector
13. Lift the optical-drive assembly off the computer base.
Begin.
Removing the Battery Pack).
Removing the Base Cover).
Removing the Center Control
Removing the Keyboard).
Removing the Macro Keyboard).
Removing the Power-Button
Removing the Display Assembly).
step 10 to step 16 in Removing the Palm
Removing the I/O Board).
2 screws (3)
Removing the Battery
Cover).
Board).
Rest.
Pack) before working inside the