Alienware M18x Service Manual page 38

1 screw
11. Lift the status-light board off the palm-rest assembly.
Replacing the Status-Light Board
1. Follow the instructions in Before You
2. Align the slots on the status-light board with the alignment posts on the palm-rest assembly and secure the status-light board in place.
3. Replace the screw that secures the status-light board to the palm-rest assembly.
4. Route the status-light board cable through the routing guides on the palm-rest assembly.
5. Follow the instructions from
6. Replace the display assembly (see
7. Replace the macro keyboard (see
8. Replace the keyboard (see
9. Replace the center control cover (see
10. Replace the base cover (see
11. Replace the battery pack (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Back to Contents Page
Begin.
step 4 to step 7 in Replacing the Palm
Replacing the Display Assembly).
Replacing the Macro Keyboard).
Replacing the Keyboard).
Replacing the Center Control
Replacing the Base Cover).
Replacing the Battery Pack).
Rest.
Cover).