Center Control Cover; Removing The Center Control Cover - Alienware M18x Service Manual

Back to Contents Page
Center Control Cover
Alienware M18x Service Manual
Removing the Center Control Cover
Replacing the Center Control Cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Center Control Cover
1. Follow the instructions in Before You
2. Remove the battery pack (see
3. Remove the base cover (see
4. Remove the five screws that secure the center control cover to the computer base.
CAUTION: Be extremely careful when removing the center control cover. The cover along with the cable that attaches to it are fragile.
5. Turn the computer over and open the display as far as possible.
6. Gently pry up the center control cover and then ease the tabs on the center control cover out of the slots on the palm-rest assembly.
Begin.
Removing the Battery Pack).
Removing the Base Cover).
Removing the Battery Pack) before working inside the