Configure Wep - D-Link DWR-730 User Manual

Section 4 - Security
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before
enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based configuration by opening a web browser and entering the IP address of
the router (192.168.0.1). Click on Wireless Settings on the left side.
2. Next to Security Mode, select WEP.
3. Next to WEP Key 1, enter a WEP key that you create. Make sure you enter this key exactly on all your
wireless devices. You may enter up to 4 different keys.
4. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter,
you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as
you did on the router.
D-Link DWR-730 User Manual

Configure WEP

32