D-Link DWR-730 User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Router
  5. DWR-730
  6. User manual

D-Link DWR-730 User Manual

Hspa+ mobile router
Hide thumbs Also See for DWR-730:
Table of Contents

Advertisement

Quick Links

See also: Configuration Manual , User Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWR-730

Summary of Contents for D-Link DWR-730

  • Page 2 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.

  • Page 3: Table Of Contents

    Network Setup ................17 Troubleshooting...............43 SIM Settings ..................18 MAC Filter ..................19 Wireless.Basics..............45 Advanced Internet Settings ............20 What is Wireless? .................46 Advanced Wireless Settings ............21 Tips ....................48 Administrator Settings .............22 Wireless Modes ................49 MicroSD Card Reader ..............23 SMS Messages................24 D-Link DWR-730 User Manual...
  • Page 4 Table of Contents Networking.Basics............50 Check your IP address ...............50 Statically Assign an IP address ..........51 Warnings.and.Declarations..........52 Technical.Specifications...........56 D-Link DWR-730 User Manual...

  • Page 5: Product.overview

    • Battery • USB cable • Power adapter Note: Using a power supply with a different voltage rating than the one included with the DWR-730 will cause damage and void the warranty for this product. System Requirements • A compatible (U)SIM card with service •...

  • Page 6: Introduction

    Section 1 - Product Overview Introduction The D-Link DWR-730 HSPA+ Mobile Router is a palm sized 3G router, slim and small enough to carry in your pocket. It allows you to access and share your 3G mobile Internet connection anywhere and anytime.

  • Page 7: Hardware Overview

    Battery fully charged 100% to 50% capacity Green Charging, 99% to 50% capacity 50% to 10% capacity Charging, 50% to 0% capacity Less than 3% capacity Less than 10% capacity WiFi LED Green WiFi active Transmitting WPS active D-Link DWR-730 User Manual...

  • Page 8: Back

    Section 1 - Product Overview Hardware Overview Back Micro USB Port MicroSD Slot Port/LED Function Micro USB Port Connects to a PC or power adapter through the included USB cable. MicroSD Slot Accepts a MicroSD card. D-Link DWR-730 User Manual...

  • Page 9: Wireless Installation Considerations

    Wireless Installation Considerations The DWR-730 can be accessed using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the quantity, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range.

  • Page 10: Product Setup

    Section 2 - Installation Product Setup 1. Remove the back cover of the DWR-730, and remove the battery. 2. Insert the SIM card with the gold contacts facing down. Make sure that you insert the SIM card in the right direction.

  • Page 11: Wifi/Wps Configuration

    ƒ Long press (5 seconds) the WiFi/WPS button to enable/disable WiFi. The WiFi/ WPS LED will change accordingly. WiFi/WPS button Note: When MicroSD card reader is enabled, WiFi will be disabled. You can only re- enable this function through the WebGUI. D-Link DWR-730 User Manual...

  • Page 12: Web-Based.configuration.utility

    Type admin in the User Name field and then enter your password. Leave the password blank by default. Click the Log in button to log in to the router. If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DWR-730 User Manual...

  • Page 13: Internet Connection Setup Wizard

    Once logged into the web interface of the router, the Setup > Internet page will appear. Click the Internet Connection Setup Wizard button to quickly configure your router using the setup wizard. If you want to enter your settings without running the wizard, click Manual Internet Connection Setup and skip to Internet Setup. D-Link DWR-730 User Manual...
  • Page 14 Section 3 - Configuration Click Next to continue. Create a new password and then click Next to continue. Configure your 3G Internet Connection settings and then click Next to continue. D-Link DWR-730 User Manual...
  • Page 15 Section 3 - Configuration Click Connect to save your settings. Once the router has finished rebooting, click Continue. Please allow 1-2 minutes to connect. D-Link DWR-730 User Manual...

  • Page 16: Internet Setup

    Enter a password. APN: Enter the APN description. Reconnect Mode: Set to Always On, On Demand, or Manual. Maximum Idle Time: Enter a maximum idle time in minutes. Enter 0 to allow the connection to idle indefinitely. D-Link DWR-730 User Manual...

  • Page 17: Wireless Settings

    Manual Wireless Setup. Click the Wireless Connection Setup Wizard button to view the Wireless Security Setup Wizard menu. The Welcome menu lists the steps used for setup. Click on the Next button to continue. D-Link DWR-730 User Manual...
  • Page 18 It is recommended that you tick the checkbox to use WPA wireless encryption to secure your wireless network. Click Next to continue. Type a password that you would like to use for your wireless network in the Network Key: entry field. Click Next to continue. D-Link DWR-730 User Manual...
  • Page 19 The final menu appears to indicate that setup is complete. You should write down the Wireless Network Name (SSID) and Network Key for future reference when connecting other wireless devices to your wireless network. Click Save to finish the Security Wizard. D-Link DWR-730 User Manual...

  • Page 20: Manual Wireless Setup

    Section 3 - Configuration Manual Wireless Setup Use this section to configure the wireless settings for your D-Link router. Enable Wireless : Check box to enable wireless and enter Router mode, uncheck to disable wireless and enter Modem mode. In Modem mode, you will need to use the Micro USB cable to connect the router to your PC.

  • Page 21: Network Setup

    Enter the router IP address. Subnet Mask: Enter the subnet mask. Enable DHCP Server: If you want to enable DHCP Server, check Enabled. Otherwise, check Disabled. DHCP IP Address Range: Enter values for the DHCP IP address range. D-Link DWR-730 User Manual...

  • Page 22: Sim Settings

    If you would like to enable or disable the PIN Function: authentication fuction, click Enable/Disable PIN Function. Modify PIN Code: If you want to modify the current or default PIN value, click Modify PIN Code to change it. D-Link DWR-730 User Manual...

  • Page 23: Mac Filter

    Use MAC (Media Access Control) Filters to allow only specific computers or devices to access your wireless network. Select Enabled to enable MAC filtering, and enter the MAC addresses of the computers and devices you want to have access; all other computers and devices will be denied access to your wireless network. D-Link DWR-730 User Manual...

  • Page 24: Advanced Internet Settings

    Disabling it will prevent the router from doing this, but will still allow you to send and recieve SMS messages. Network Type: Allows you to determine whether the router will connect via 2G only, 3G only, or 2G and 3G(whichever is available) D-Link DWR-730 User Manual...

  • Page 25: Advanced Wireless Settings

    Set the Maximum Idle Time for your wireless Max. Associated Number: network before entering Power Save mode(if it is enabled). Determines the maximum number of wireless PCs, devices, and other clients that can connect to your wireless network. D-Link DWR-730 User Manual...

  • Page 26: Administrator Settings

    Section 3 - Configuration Administrator Settings Use this section to change the password for the Administrator account. Password: Enter a password. Verify Password: Verify the password. D-Link DWR-730 User Manual...

  • Page 27: Microsd Card Reader

    MicroSD Card Reader The DWR-730 allows you to share files stored on an inserted MicroSD card. Once you enable the MicroSD card reader, you will see a new USB device appear as a storage/memory device on your computer allowing you to modify files directly. You must insert a MicroSD card to use this feature.

  • Page 28: Sms Messages

    Section 3 - Configuration SMS Messages The DWR-730 allows you to read, write, and send SMS messages directly from the user interface. Note: You must insert an active SIM card to use this feature. D-Link DWR-730 User Manual...

  • Page 29: Factory Reset

    Section 3 - Configuration Factory Reset Use this section to restore the router to the factory default settings. Restore To Factory Click this button to restore all settings to the factory Default: defaults. D-Link DWR-730 User Manual...

  • Page 30: Firmware Upgrade

    After downloading a firmware file to your computer, click Choose File to select the firmware file, then click Upgrade to start the upgrade process. Note: Do not turn off or disconnect the power during the upgrade process, or you may cause damage to your device. D-Link DWR-730 User Manual...

  • Page 31: Device Information

    All of your Internet and network connection details are displayed on this page. The firmware version is also displayed here. General: Displays the firmware version. WAN: Displays information about the WAN. LAN: Displays information about the LAN. D-Link DWR-730 User Manual...

  • Page 32: Statistics

    Section 3 - Configuration Statistics All of your Internet traffic details are displayed on this page. Clear History: Clears the traffic statistics information. D-Link DWR-730 User Manual...

  • Page 33: Wireless Information

    Section 3 - Configuration Wireless Information All of your wireless connection details are displayed on this page. Number of wireless Displays the wireless clients and their clients: MAC addresses. D-Link DWR-730 User Manual...

  • Page 34: Support

    Section 3 - Configuration Support The Support section contains additional information about the router and its various settings for reference. D-Link DWR-730 User Manual...

  • Page 35: Wireless.security

    Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DWR-730 offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) •...

  • Page 36: Configure Wep

    4. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DWR-730 User Manual...

  • Page 37: What Is Wpa

    The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DWR-730 User Manual...

  • Page 38: Configure Wpa-Psk/Wpa2-Psk

    4. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK (or WPA2-PSK) on your adapter and enter the same passphrase as you did on the router. D-Link DWR-730 User Manual...

  • Page 39: Connect.to.a.wireless.network

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-730 User Manual...

  • Page 40: Configure Wireless Security

    Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-730 User Manual...
  • Page 41 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DWR-730 User Manual...

  • Page 42: Using Windows ® Xp

    (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-730 User Manual...

  • Page 43: Configure Wep

    XP Wireless Utility by right-clicking on ® the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-730 User Manual...
  • Page 44 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router. D-Link DWR-730 User Manual...

  • Page 45: Configure Wpa-Psk

    XP Wireless Utility by right-clicking on the ® wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-730 User Manual...
  • Page 46 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DWR-730 User Manual...

  • Page 47: Troubleshooting

    1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility.
  • Page 48 2. How can I upgrade the firmware on the device? To update the firmware on the DWR-730, connect the device into an available USB port on your PC. Next, log into the WebGUI and navigate to the Tools tab near the top. Then click on the Firmware Upgrade tab on the left. Browse for the firmware image file and click Upgrade. Please do not disconnect the DWR-730 while the upgrade is in progress.

  • Page 49: Wireless.basics

    D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it.

  • Page 50: What Is Wireless

    D -Link is the worldwide leader and award winning designer, developer, and manufac turer of net work ing produc ts. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
  • Page 51 Appendix A - Wireless Basics Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...

  • Page 52: Tips

    The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.

  • Page 53: Wireless Modes

    An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DWR-730 User Manual...

  • Page 54: Networking.basics

    Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.

  • Page 55: Statically Assign An Ip Address

    Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DWR-730 User Manual...

  • Page 56: Warnings.and.declarations

    Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. D-Link DWR-730 User Manual...
  • Page 57 For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and the positions the handset a minimum of 1.0 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. D-Link DWR-730 User Manual...
  • Page 58 (channels 1-9) may be used. For the latest requirements, see http://www.art-telecom.fr. Wireless LAN Module’s Maximum EIRP Frequency Ranges (MHz) Indoors Outdoors 2400 MHz ~ 2446.5 MHz 10mW Not Permitted 2446.5 MHz ~ 2483.5 MHz 100mW 100mW on private property with Ministry of Defense approval. D-Link DWR-730 User Manual...
  • Page 59 -Users have to use the connection to USB interfaces with USB 2.0 version or higher. -Risk of explosion if battery is replaced by an incorrect type. -Dispose of used batteries according to the instructions. -Please make sure the temperature for adapter will not be higher than 55 ˚C D-Link DWR-730 User Manual...

  • Page 60: Technical.specifications

    Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DWR-730 User Manual...

Table of Contents