Installation; Zero Configuration Setup - D-Link DCS-2332L User Manual

Section 2: Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically
configures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-2332L
and automatically add the camera to your mydlink account. After the short time it takes to do this you can remotely access
your camera from the www.mydlink.com website to manage and monitor your DCS-2332L.
Connect the Ethernet Cable
Using the pre-attached Ethernet cable connect the free end to your network.
Attach the External Power Supply
Attach the external power supply to your wall outlet or power strip.
D-Link DCS-2332L User Manual

Installation

Zero Configuration Setup

16