D-Link DCS-2332L User Manual page 35

Section 3: Configuration
COS SETTING: Enabling the Class of Service setting implements a
best-effort policy without making any bandwidth
reservations.
QOS SETTING: Enabling QoS allows you to specify a traffic priority
policy to ensure a consistent Quality of Service during
busy periods. If the Network Camera is connected to a
router that itself implements QoS, the router's settings
will override the QoS settings of the camera.
IPV6: Enable the IPV6 setting to use the IPV6 protocol.
Enabling the option allows you to manually set up
the address, specify an optional IP address, specify an
optional router and an optional primary DNS.
MULTICAST
The DCS-2332L allows you to multicast each of the
available streams via group address and specify the TTL
value for each stream. Enter the port and TTL settings
you wish to use if you do not want to use the defaults.
D-Link DCS-2332L User Manual 35