Connecting With A Hdmi Mini Cable; Connecting With The Av Multi Cable - Panasonic HDCSD600K Operating Instructions Manual

Connecting with a HDMI mini cable

Select the desired method of HDMI output.
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[576p]
≥ [AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [576p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
≥ Image will not display on TV for a few seconds in the following cases.
j When the 1080/50p recording mode is turned on/off during motion picture recording
mode
j When [CHANGE VIDEO] is touched during motion picture playback mode

Connecting with the AV multi cable

AV multi connector output setting can be changed.
: [SETUP] # [AV MULTI] # desired setting
[COMPONENT]:
[AV OUT]:
Changing the component output setting
: [SETUP] # [COMPONENT OUT] # desired setting
[576i]: When connecting to the component terminal on the TV compatible with 576i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with
1080i.
(Playback is in high definition quality.)
92
VQT2U82
When connecting to the component terminal
When connecting to the video terminal