Shooting Guide; Zoom Mic - Panasonic HDCSD600K Operating Instructions Manual

[SHOOTING GUIDE]

Message is displayed when this unit is moved rapidly.
≥ Change the mode to
: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]
When "CAMERA PANNING IS TOO FAST." appears, move the unit slowly while recording.
≥ Message will not appear while pausing the recording. (Message will appear even if it is
pausing the recording if [DEMO MODE] is set to [ON].)
≥ In some recording conditions, messages may not appear.
[WIND NOISE CANCELLER]
This will reduce the wind noise coming into the built-in microphones while maintaining the
realism.
≥ Change the mode to
≥ Switch to manual mode. (l 71)
: [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON]
≥ When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and
the setting cannot be changed.
≥ You may not see the full effect depending on the recording conditions.

[ZOOM MIC]

Directivity of the microphone is interlocked with the zoom operation. Sounds near the front of
the unit are recorded more clearly if you zoom in (close-up) and surrounding sounds are
recorded more realistically if you zoom out (wide angle).
≥ Change the mode to
≥ Switch to manual mode. (l 71)
: [RECORD SETUP] # [ZOOM MIC] # [ON]
62
VQT2U82
.
.
.