Driver Installation - Fujitsu Siemens Computers RELIABILITY D1859 Technical Manual

Brief instructions on installing system board
► Connect the plugs for the power supply, control panel and drives to the corresponding
connections on the system board.

Driver installation

► Install the drivers for the chipset. You may find the driver on the "ServerStart" and
"ServerSupport" CDs..
6
► Should no suitable connection field be
provided in the case, then you must
install the connection field (1) provided.
Ensure the plate is aligned properly so that
the connections are suitable for the system
board later.
► Set the system board on the edge on
which the connection field is located (2)
and then insert the board in the
case (3).
Make sure that spacers in the housing are
only mounted at points at which there are
mounting holes in the system board.
► Fasten the system board with the
screws.
D1859 (Econel 50)