Advertisement
Front Projection-Desktop
l
The default setting.
Rear Projection-Desktop
l
The projector reverses the image so you can project from behind a translucent screen.
Front Projection-Ceiling Mount
l
The projector turns the image upside down for ceiling-mounted projection.
Rear Projection-Ceiling Mount
l
The projector simultaneously reverses and turns the image upside down. You can project from behind a translucent
screen with a ceiling-mounted projection.
Signal Type
Manually select signal type RGB, YCbCr, YPbPr.
Lamp Hour
Displays operating hours since lamp timer reset.
Lamp Reset
Use this function only after a new lamp is installed in the projector. Select the left Lamp Reset icon (light bulb and arrow
under the icon), and press the Enter button to reset the lamp timer.
Power Saving
Use this function to select the power saving delay period. Press "Yes" to go into the "set time" sub menu.
Set Time(Min)
Set the power saving delay period as you prefer. When the projector is not receiving an input signal for the selected period
of time, the projector will automatically enter power saving mode, and turn off the lamp. After a one-minute cooling period,
the projector will turn back on with detection of an input signal or by pressing the "Power" button.
Auto Source
The projector will always automatically search for available input signals when Auto Source is On, which is the default
setting. Press the "Source" button with Auto Source On to automatically search for the next available input signal.
Selecting Off will lock on the current input source. Set Auto-Source to Off to step through the different input signals
individually.
Power Saving Menu
Advertisement
