Download Print this page

Dell 2100MP User Manual page 31

Content: dell 2100mp projector user's guide
Hide thumbs Also See for 2100MP:

Advertisement

 Image color is not correct
If your graphic card output signal is "sync on Green", and you would like to display VGA at 60Hz signal, please go into
l
"OSD--> Management --> Signal Type" and select "RGB".
Or run "Self-diagnostic test" (see "
l
 Image is out of focus
Adjust the focus ring on the projector lens.
l
Ensure that the projection screen is within the required distance from the projector (4.0ft [1.2m] to 39.4ft [12m]).
l
 The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect ratio to full screen with a 4:3 (letter-box) default setting.
If the image is still stretched, adjust the aspect ratio as follows:
If you are playing a 16:9 DVD, select 4:3 aspect ratio type on your DVD player if capable.
l
If you cannot select 4:3 aspect ratio type on your DVD player, select 4:3 aspect ratio in the "All Images" menu within the
l
OSD function.
 Image is reversed
Select
Management
l
 Lamp is burned out or makes a popping sound
When the lamp reaches its end of life, it may burn out and may make a loud popping sound. If this occurs, the projector will
l
not turn back on until the lamp is replaced. To replace the lamp, see
 Self-diagnostic for video
Dell 2100MP projector provides self-diagnostic test of the projector video display (for Video, S-video, Component-I). Use this
l
advanced feature for preliminary self-diagnostic on your projector when encountering the display problem for video.
After turning on the projector, press "+" and "-" buttons on the control panel simultaneously and release the buttons when
l
screen goes blank.
Contact Dell if the projector doesn't enter diagnostic mode or if the colors are incorrectly displayed. Otherwise, ensure that
l
the cables are properly connected and the media source is securely installed.
Press "+" and "-" buttons again to exit the diagnostic mode.
l
 
 
Back to Contents Page
 
Self-diagnostic for video
from the OSD and adjust the projection mode.
" ) for preliminary diagnostic on image color problem.
"Changing the
Lamp".

Advertisement

loading