Brother PJ673-K Manual page 24

Chapter 1
d
Type the IP address of your PJ-673 in
the [Printer Name or IP Address] box,
and then click [Next].
NOTE
If the installation was completed using the
default settings, type in [169.254.100.1]
as the IP address of your PJ-673. If the
settings were changed, type in the new
settings.
e
If the port was detected automatically:
Click [Finish].
If the port was not detected
automatically:
Select [Custom], and then click
[Settings...].
Type in the following settings, and then
click [OK].
Protocol: Raw
Raw Settings: 9100
SNMP Status Enabled: Check box
cleared
20
Type the specified IP address as the
port name. If the installation was
completed using the default settings,
type in [169.254.100.1] as the IP
address.
Click [OK] to return to the previous
screen, and then click [Next], then
[Finish].
f
®
Windows 8:
Click [Control Panel] in [Apps] screen -
[Hardware and Sound] - [Devices and
Printers], and then click [Add Printer].
®
Windows 7:
Open [Start]-[Devices and Printers],
and then click [Add Printer].
®
Windows Vista :
Open [Start]-[Control Panel]-
[Hardware and Sound]-[Printers], and
then click [Install Printer].
®
Windows XP:
Open [Start]-[Printers and Faxes], and
then click [Install Printer].