Fujitsu MPE3XXXAE Product Manual page 122

Table 5.11 SMART error log data format (2/2)
Byte
Error Log Data
45
Structure 1
46 to 58
59
5A, 5B
5C to 1C3 Error Log Data
Structure 2 to
Error Log Data
Structure 5
1C4, 1C5 Drive Error Total Number
1C6 to 1FE Reserved
1FF Checksum
Error log index
Indicates the latest error log number. If an error has not occurred, 00 is displayed.
Error log 1 to 5
When an error occurs, the error log index value is incremented and information at the time
the error occurred is recorded in the error log area specified by this value. When the error
log index exceeds 05, it returns to 01.
Command data 1 to 5
Indicates five commands data in order received by the device until the error occurs.
Commands for which an error occurred are included in Command Data 5.
Error data
Indicates the I/O register values when the error is reported.
State
Bits 0 to 3: Indicates the drive status when received error commands according to the
following table.
Bits 4 to 7: Vendor unique
Item
Error Data Status register
Structure
Vendor Unique
State
Total power on time [hour]
This format of each error log data structure is the same as Byte 02
to 5B.
C141-E093-01EN 5 - 57