IPsec Service Template
Specify the protocol and the port number to use for IPsec connections. A maximum of 10 Service Template
can be used.
Start your web browser.
Type "http://machine's IP address/" into your browser (where "machine's IP address" is the machine's IP
No password is required by default. Enter a password if you have set one and press
Click the Network tab.
Click IPsec Service Template.
10 Service Template will be displayed. If the Service Template has not been configured,
Not Configured will be displayed.
Click this button to delete the selected Service Template. However, the currently used
Service Template cannot be deleted.
Click the number for the Service Template that you want to create. Select the services that you want to
use for IPsec in the screen below, and create the IPsec Service Template.
In addition, if you want to create original services, click Setup Service. (See Setup Service uu page 8.)