Chassis Intrusion Connector (4-1 Pin Chassis); Front Panel Audio Connector (10-1 Pin Aafp) - Asus P5KPL-VM 1394 SI User Manual

9.

Chassis intrusion connector (4-1 pin CHASSIS)

This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default , the pin labeled "Chassis Signal" and " Ground" are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
P5KPL-VM Intrusion Connector

10. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC'97 audio standard.
P5KPL-VM Front Panel Audio Connector
•
•
1-34
We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard's high-definition audio
capability.
By default, this connector is set to HD Audio. If you want to connect a High
Definition front panel audio module to this connector, set the Front Panel
Support Type item in the BIOS to [HD Audio]. See section "2.4.4 Chipset"
for details.
CHASSIS
Azalia-compliant Legacy AC'97-compliant
pin definition
AAFP
(Default)
pin definition
Chapter 1: Product introduction